Be prepared for all possible conditions with the 20 Ton Wisperkool HVAC. Each unit is capable either heater or cooling depending on the weather at your installation, and is easily transported via forklift. Overall, the narrow footprint, vertical design, and white paint allow the Wisperkool HVAC unit to blend in with most white tent installations. The standard bi-directional “free blow” grille arrangement distributes the air evenly inside the tent, or can be directed with the purchase of additional ducting and vent adapters for situations requiring more on-the-spot temperature control.
The standard environmental unit conversion is 1 ton of air conditioning for 75 to 100 square feet of space; the 20 Ton unit will therefore provide adequate conditioning for anywhere from 1500 to 2000 square feet. Be aware that environmental conditions and structural design greatly affects these numbers. For example, warmer climates should base estimates on the lower end of the scale (1 ton: 75 ft2) while the higher end (1 ton: 100 ft2) applies more to northern climates. A tent, with less air-tight design, would also benefit from using the lower end of the scale.
- Dimensions: 92" Long x 35" Deep x 94 7/16" High (2.3 m x 0.9 m x 2.4 m)
- Weight: 2,200 lbs (998 kg)
- Vertical Unit
- Powder-coated Finish
- Rental Friendly
- Welded-Frame Construction
The company warrants the equipment manufactured by it to be free from defects in material and workmanship for a period of one year on a pro-rata basis from the date of shipment provided the machine is operated normally at its rated capacity and is maintained as directed in the owner's manual.. When defective parts show deliberate abuse this warranty will be subject to cancellation at the option of the company. This warranty is in lieu of and excludes all other warranties, guarantees or representations express or implied. There are no implied warranties of merchantability or of fitness for a particular purpose. Any articles not of the companies manufacture are sold only under such a warranty as maker gives the company and which the company is able to extend to its customer. Such articles are not warranted in any way by the company.
All machines and parts claimed to be defective must be returned during the warranty period to the company with transportation prepaid for examination. Those determined by the company to be defective in material and workmanship will be repaired or replaced at the companies option FOB the companies factory. In no event shall the company be liable for claims (whether based upon breach of contract, breach of express or implied warranty, negligence or any other grounds) for any damages whether direct, immediate, foreseeable, consequential, incidental or special, or any expenses incurred by reason of the use or misuse or sale of any machines or parts which do or do not conform to the terms and conditions of the contract.
When the original equipment warranty has expired the company does not warrant replacement parts as the condition of the equipment may effect the life of the part. Modifications of the equipment or the use of repair parts not approved by the company will subject this warranty to cancellation.