Proper anchoring of tents
is vital to the safety of and reputation of every tent company. A tent
is only as strong as the
anchors that support it. Once an anchor gives loose, it makes the tent
more vulnerable to many problems from cold crack to collapse. Manufactured
in Celina Tent’s fabrication shop, these high quality stakes are
made from 1” high carbon steel. The holding capacity of a tent stake is due
to a significant degree of friction developed between the stake and the
soil which surrounds it. The deeper the embedment of the stake in the soil,
the greater the surface area of the stake which is in contact with the
soil; resulting in a greater holding power. Always install stakes vertically
compared to installation at an angle. The stake has greater holding power
in the vertical position and this also simplifies installation and removal
of the stake. Celina Tent recommends
that at least a 36” stake
is used with all 20’ wide tents and smaller. We recommend a 42” stake
for all 30’ wide tents and greater. Keeping in mind that many factors
have to be considered when staking a tent: underground utilities, soil
type, ground moisture, presence or absence of pavement, and most importantly
wind.
