celina tent header

Frame Tents

   
View Pricing and Receive Frame Tent Quotes Here.

Classic Frame Tents are among Celina’s product line of frame supported party tents. Frame tents are advantageous for applications that require the maximum usage of space under the tent top. The vinyl tent top is secured to a tent frame, jointed together by steel fittings, which is erected and supported by frame legs around the perimeter eliminating the need for center poles. The tent frame must be secured to the ground at each side leg using Celina’s ratchet systems (or ropes) and *steel stakes, water barrels where stakes are not permitted, or other type of method depending on surface requirements. Popular applications for frame tents include, but are not limited to, weddings, trade show exhibits, graduations, and many other events which may require a party tent. Celina’s Classic Frame Tents are temporary tents that are not engineered or tested for inclement weather conditions; however, we do offer three different types of frame systems to support various tent applications.
.
Galvanized Steel Tube Frames are less expensive, but heavier to transport which can increase shipping costs and installation time. Steel frames provide a strong tent application, but may also leave a film - commonly found on steel products - on lighter colored tent tops after several uses. Available on all 20’ wide Classic Frame Tents.

Aluminum Single Tube Frames are lighter weight which reduces shipping costs, provides quicker tent installation time, and gives an attractive anodized aluminum appearance. Aluminum frames provide a more durable tent application than steel frames. Available on all 20’ wide Classic Frame Tents.

ETS Aluminum Frames are the strongest frame available for use on Celina Classic Frame Tent applications. Mostly constructed of Anodized Aluminum Double Tube (excluding spreader tubes), the ETS Frame also includes additional cable and brace supports in required areas on larger frame tents. Available on 30’ wide & 40’ wide Classic Frame Tents.

*Steel stakes are recommended to be installed approximately 4’ to 5’ from the base of all perimeter side legs.

Frame tent Instructions

 
                       

Frame Tops are constructed with:

   
  • 1st quality 14 oz. translucent or 16 oz. BLOCKOUT vinyl
  • All panels are bonded with 1" heat sealed overlapped seams
  • 7/32" Polyester side curtain rope line held in with 1" polyester webbing sewn approximately every 15" around perimeter of tent top. Side curtain rope line is replaceable if ever needed.
  • Reinforcement patches at crown locations
  • Scalloped valances bound with vinyl binding
  • 95% of tent top is bonded with HEAT SEALED construction.
  • Frame tents available in a standard (canopy) style or gable end (walkway) style
  • All Celina Tent frame tents are designed to fit West Coast Style Frames. Includes Setup Directions
  •  
     
    Receive Frame Tent Quotes Here.
     
     
               
                 
           
    Copyright Celina Tent Inc.
    Your Customer ID NUMBER 38.103.63.17